X10 PowerHouse 2-Way Transceiver Module (RR501)
Never Used!
The X10 PowerHouse 2-Way Transceiver Module (Model RR501) routes wireless commands to your X10 modules receiving signals from RF wireless controllers such as key chain and palmpad remotes and motion sensors. It will control up to 16 sets of X10 appliances or lights per house code. When used with X10 computer interface it will process signals from your macros, timers and other programmable events. This transceiver can also act as X10 plug-in appliance module, unit code can be set to 1 or 9 and it has a manual on/off switch. Set up your own "home network" and make your home work for you!
Note:
For larger X10 systems, you will need 1 Transceiver per house-code setting. For example, if you have all your interior lights on House Code A, all your exterior lights on House Code B, and all your wireless cameras on House Code C, you would need 3 Transceivers. Simply set each transceiver to its corresponding House Code. For smaller X10 systems, you can have your cameras and lights on one house code (ex. House Code A), and would only need one Transceiver.
Features:
Rated at 15 amps resistive load, 500W incandescent, 400W television, 1/3 HP motor load.
powerline.
Weight: 1.00 Pound(s) |
