| |
Venstar Thermostat - INSTEON Remote Control Thermostat 1-Day Programmable(2491T1) Energy Star
Brand New!
Afriel Reward Points Equal Cash Off Discounts! Reward Points for this product is listed below.
| |
|
Save energy and money on bills by remotely controlling your thermostat
Everything you need: Includes Venstar T1700 Thermostat plus INSTEON Thermostat Adapter
Works with heat/cool and heat pump systems
Perfect for anyone whose schedule varies throughout the week
Award-winning INSTEON technology: the ultimate in simplicity and reliability
Control the temperature from anywhere in the house! INSTEON Remote Control Thermostat allows you to recall stored set point/mode settings from any INSTEON-compatible controller. Faster than grabbing a blanket, you can use your coffee table RemoteLinc to recall "comfort mode," bringing the room that perfect temperature. When turning off your lights for the night from your bedside KeypadLinc, you can also save some energy and money by recalling "energy-savings mode" which minimizes the activity of your HVAC system while you're sleeping. Because you can program any button on an INSTEON controller to any temperature and mode on the thermostat, the possibilities are endless.
Compatible Thermostat Included
This kit contains the Venstar T1700 thermostat along with the compatible INSTEON Thermostat Adapter; this thermostat requires power to function. If you do not have a "common" wire running to your thermostat from your heating/cooling equipment, you may need either to run a new wire or to install a thermostat Add-A-Wire Accessory kit.
To schedule different heating/cooling activation on different days and report humidity, choose the Venstar Thermostat - INSTEON Remote Control Thermostat 7-Day Programmable.
Note: The INSTEON Thermostat is an RF-only INSTEON product, which is not X10 compatible. At least one Access Point is required to communicate with your plug-in or wire-in INSTEON-compatible devices.
Whats Included:
INSTEON Thermostat Adapter
T1700 Thermostat
Mounting hardware
Manual
Installation instructions
|
|
|
Easy To Install and Set Up
Once you've installed your thermostat, INSTEON Thermostat Adapter snaps right into the jack on the bottom. Now all you need to do is set the thermostat to the mode/temperature you want and link it to the INSTEON controller of your choice, using INSTEON's simple Plug-n-Tap setup. Every time you activate that scene on the controller, your thermostat will return to the corresponding temperature. From plugging in your INSTEON Thermostat Adapter to changing the temperature from an INSTEON controller, setup takes as little as a couple of minutes.
Non-Volatile Memory
All thermostat settings are stored in non-volatile memory and are not lost during power failures.
Certifications and Warranty
All INSTEON products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire line of Smarthome-brand INSTEON products with a full 2-year warranty.
This product has been awarded the ENERGY STAR.
|
|
| Specifications |
| General |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2491T1 |
| UPC: |
718122388318 |
| Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
| Digital Thermostat Specifications |
| Manufacturer: |
Venstar |
| Manufacturer Product No.: |
T1700 |
| UPC: |
662442911377 |
| Dimensions: |
4 3/4" x 4 1/4" x 1 1/8" |
| Control Stages: |
2 heat, 1 cool |
| Compatible Systems: |
Heat/cool; heat pump |
| Approvals: |
UL listed, FCC Compliant, Energy Star Compliant |
| Warranty: |
1 year, limited |
| INSTEON Thermostat Adapter Specifications |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2441V INSTEON Thermostat Adapter for Venstar/ Totaline |
| UPC: |
718122387212 |
| Range: |
150' (line of sight) |
| Frequency: |
915 MHz |
| Warranty: |
2 years |
| Operation |
| Status LED: |
1 Green LED (normally on) |
| Setup Memory: |
Non-volatile EEPROM |
| Software Supported features (as avail via software such as HouseLinc 2) |
| Heat set point: |
Supports all set points of Thermostat |
| Cool set point: |
Supports all set points of Thermostat |
| Temperature Status Request: |
Supported |
| Mode Status Request: |
Supported |
| Fan Status Request: |
Supported when in “Auto” mode |
| Mode Control: |
Heat, Cool, Auto, OFF |
| Fan Control: |
On, Auto |
|
Degree Format (F/C): |
As Supported by Thermostat |
| INSTEON Features |
| INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
| INSTEON Links: |
417 out of 16,777,216 possible |
| INSTEON Messages Repeated: |
Yes |
| Mechanical |
| Operating Conditions: |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Storage Conditions: |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions: |
1.75" H x 2.89" W x .58" D |
| Weight: |
.80 oz |
| Connector: |
RJ11 4 wire (top of unit) |
| Electrical |
| Input Power: |
5VDC 30mA Standby (Powered from Thermostat) |
| FCC Certification: |
ID SBP2441 |
| Industry Canada Certification: |
IC :S202A-2441V | | Buy this item and earn 160 points valued at $6.38. Weight: 1.00 Pound(s) |
|
