Leviton 10-Amp Relay Wall Switch (HCS10-1SW)
Never Used!
Sophisticated Scene Lighting from Leviton!For high wattage lighting (without dimming) Rated at 10 amps at 120V (1200 watts), 1/4 HP motors Ready for 3-Way switch installations With Intellisense® AGC!
For automated control of fluorescent lights, appliances or high wattage incandescent lighting, simply replace your existing wall switches with this easy-to-install Leviton X10-compatible switch. Unlike standard dimmer switches, which use triacs for switching, this switch uses a mechanical relay to control the load, so it has a much higher load capacity.
The relay switching means the X10 receiver circuitry is somewhat isolated from the load and is relatively unaffected by the type of load being switched (provided it does not exceed rated capacity). Features include ALL LIGHTS ON and ALL UNITS OFF command response and a green LED light that indicates the switch is on.
NOTE: Because this switch responds to the ALL LIGHTS ON command, care should be taken when used to switch non-lamp loads. If you don't want your appliance to respond to this command, use an X10 Appliance Module or an X10 Wall Receptacle.
Weight: 1.00 Pound(s) |
