Intermatic CA8900 Wireless Z-Wave Digital Thermostat(CA8900)

The CA8900 is a digital thermostat that can be controlled wirelessly with Z-Wave controllers supporting the Thermostat General V2 Device Class. The thermostat is compatible with all standard 24 VAC heating and cooling systems, up to two-stage heat, one-stage cool, and two-stage heat pump. The CA8900 operates as a simple thermostat with buttons to set target temperatures for heat and cool modes. The Save Energy button adds two more modes for target temperatures to provide a single button set-back mode for easy operation. It can easily be retrofitted to existing systems as part of a Z-wave control strategy.

The CA8900 Wireless Thermostat provides two-way communication as part of a Z-Wave® network. When it receives commands from the Central Controller Unit, it sends back confirmation that the command was received and implemented. Each module in a Z-Wave network communicates with every other module, acting as a “repeater” and routing your commands to their destination by the most reliable pathway. When Z-Wave devices (regardless of manufacturer) are installed throughout the house, signals are automatically routed around obstacles or dead spots, strengthening the network as more devices are added.

Easy energy saving buttons (NORM / SAVE)
Easy Mode Switching Buttons (HEAT/OFF/COOL)
Can be used with all 24VAC heating and cooling systems. It cannot be used with line voltage systems.

Is Digital and your desired heat or cool temperatures can easily be set on the large screen with the TEMP UP (+) and TEMP DOWN (-) buttons on the front.

A minimum 4-minute off time protects heating and cooling systems from damage.

Uses a new technique called sequential staging for more comfort with faster reaction to requested temperature changes.

Battery Backup with 2 x "AA" batteries (included)

Same as the Wayne Dalton WDTC-20 - Z-Wave Enabled Thermostat