| |
INSTEON Home Control ICON Dimmer Module (2856D2B)
Brand New!
Afriel Reward Points Equal Cash Off Discounts! Reward Points for this product is listed below.
|
Control a light remotely, turning it on and off and adjusting its brightness level Incorporates a lamp into multiple lighting design scenes in minutes. Easy-to-install dimmer uses INSTEON technology for superior performance and reliability. INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award Essential Info.
What is ICON?
ICON by SmartLabs Design is our value-oriented line of lighting and appliance control products utilizing INSTEON technology. ICON products have several of the same features as our regular products without the added cost. ICON is another great addition to the Smarthome family of products.
ICON Lamp Dimmer — Our Most Economical Remote-Controllable Plug-In Dimmer
Fill your entire home with personalized mood lighting for any occasion. The ICON Lamp Dimmer is a full-featured plug-in lamp dimmer that can be remotely controlled by a ControLinc Tabletop Controller, KeypadLinc V2, or any other INSTEON controller. This simple-to-use plug-in dimmer has advanced features like a preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on initially, as well as local control, so you can still use the lamp's built-in switch to turn the light on and off. The ICON Lamp Dimmer is made to be plugged into a 2-pin outlet. If the ground is necessary and your outlets have three pins, try the ICON LampLinc 3-pin or the version with more features LampLinc Plug-In Lamp Dimmer Module, 3-Pin. This dimmer can control incandescent loads; if you need to control a fluorescent light fixture, or a non-dimmable appliance, try the ApplianceLinc V2 3-Pin.
Never come home to a dark house again: Install Smarthome Manager Essential's Timer Software on your computer to schedule any ICON Lamp Dimmer or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset. The ICON Lamp Dimmer can control up to a 150-watt load.
What's Included:
ICON lamp dimmer module 2-pin
Quick start guide
|
|
|
Easy To Install:
The ICON Lamp Dimmer is easy to plug in and set up and yet so affordable, you'll want to add ICON Lamp Dimmers to all of your lamps. Just unplug the lamp, plug the lamp into the bottom of the dimmer, and plug in the dimmer where the lamp was plugged in. Link the dimmer to an INSTEON controller using the Plug & Tap programming method, you'll be able to turn the lamp on and off, brightening and dimming, as well. If this is your first INSTEON installation, the best way to ensure you get everything needed to provide the most reliable communication among devices is to buy the complete Plug-In Dimmer INSTEON Starter Kit, which includes everything required to set up your INSTEON network, including two LampLinc V2 Dimmers, a pair of Access Points to ensure INSTEON network reliability, and the desktop ControLinc. Learn more about INSTEON here.
Below is a comparison between the LampLinc V2, the ICON Lamp Dimmer and the LampLinc Dimmer, 3-Pin.
| Smarthome Design Product No.: |
LampLinc Dimmer, 3-Pin 2456D3
|
ICON Lamp Dimmer, 2-Pin 2856D2B
|
ICON Lamp Dimmer, 3-Pin 2856D3B
|
| INSTEON-Compatible: |
Yes |
Yes |
Yes |
| Maximum Load: |
300 Watts |
150 Watts |
150 Watts |
| INSTEON Scenes: |
30 |
30 |
30 |
| Adjustable Ramp Rate(s): |
Yes - 0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely |
No - 2 second only |
Yes - levels from .1 to 9 minutes |
| Preset on level(s): |
Yes - levels from 1% to 100% |
Yes - levels from 1% to 100% |
Yes - levels from 1% to 100% |
| Pass through outlet: |
Yes |
No |
Yes |
| X10 Ready: |
Yes |
Yes |
Yes |
| X10 Primary Address: |
1 Optional (comes unassigned), any of 256 possible |
1 Optional (comes unassigned), any of 256 possible |
1 Optional (comes unassigned), any of 256 possible |
| X10 Scenes: |
0 |
0 |
0 |
| Warranty: |
2 years, limited (Upgradeable to 7 years) |
1 year |
1 year |
| LED Color: |
White |
Amber |
Amber |
Brightness Levels
You can adjust the brightness level of the controlled lamp by pressing and holding the on or off button of your INSTEON controller. This is especially helpful when you want to create a theatrical experience when watching your favorite movie. You can also adjust the brightness remotely by sending signals from the controller to brighten or dim the light. You won't even have to leave the comfort of your chaise lounge to dim the light: Your tabletop ControLinc can be placed within arm's reach and plugged into any outlet. When you turn on the ICON Lamp Dimmer, it automatically comes on to full brightness. Setting the preset on level will make the dimmer stop at your preferred choice of 32 brightness levels. With software you can control brightness levels in 1 percent increments for ultimate flexibility. This is a great feature for your bedroom to set the mood.
Create Multi-Way Circuits
The ICON Lamp Dimmer allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way controlled lamp. First plug the lamp you want to include in the circuit into the dimmer, then plug in the ICON Lamp Dimmer into an open outlet. Link the dimmer to all the INSTEON-compatible wall switches and ControLinc Tabletop Controllers that you want to control the dimmer for a flexible, fully functional multi-way controlled lamp.
Scene Lighting
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the ICON Lamp Dimmer can be a member of 30 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on your INSTEON controller, so one set of lamps turn on to a 73 percent brightness level, while another set turns on to a 27 percent brightness level, all controlled with one command from one controller. If you want to control multiple scenes from one controller, try the KeypadLinc V2 Dimmer.
Status LED
Get a visual indication when ApplianceLinc V2 is sending or receiving INSTEON or X10 signals. The Status LED is also used for set up programming.
Compatibility
The ICON Lamp Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10. The ICON Lamp Dimmer is not X10 scene compatible.
Non-Volatile Memory
All ICON Lamp Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the ICON Lamp Dimmer will return to its last brightness level when power is restored.
Certifications and Warranty
All ICON products are safety approved. The factory for SmartLabs Design products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire ICON line of products with a full 1-year warranty.
|
| Specifications |
|
|
| General |
| Icon Product Number |
2856D2B, ICON Lamp Dimmer |
| UPC |
891114000297 |
| Warranty |
1 year |
| Operation |
| Status LED |
Amber |
| On-Levels |
32 |
| Preset On Level |
Yes - levels from 1% to 100% |
| Local Control |
Load sensing (can be disabled) |
| Setup Memory |
Non-volatile EEPROM |
| INSTEON Features |
| INSTEON Addresses |
1 hard-coded out of 16,777,216 possible |
| INSTEON Links |
30 |
| INSTEON Powerline Frequency |
131.65 KHz |
| INSTEON Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
| INSTEON Minimum Receive Level |
1 mVpp nominal |
| INSTEON Messages Repeated |
Yes |
| X10 Features |
| X10 Primary Address |
1 optional (comes unassigned) |
| X10 Scene Addresses |
N/A |
| X10 Status Response |
Supported |
| X10 Resume Dim |
Supported (by setting X10 Primary Address On-Level to zero) |
| X10 Powerline Frequency |
120 KHz |
| X10 Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level |
10 mVpp nominal |
| X10 Messages Repeated |
No |
| Mechanical |
| Operating Conditions |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions |
4.0" H x 2.5" W x 1.5" D |
| Weight |
5 oz |
| Electrical |
| Supply Voltage |
120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection |
MOV rated for 150 Volts |
| Power Plug |
2-pin polarized |
| Controlled Outlet |
2-pin polarized |
| Pass-through Outlet |
No |
| Load Types |
Plug-in incandescent lighting devices |
| Maximum Load |
150 Watts |
| Minimum Load |
25 watts (for Local Control load sensing) |
| Certification |
Safety tested for use in USA and Canada (ETL #3017581) | | Buy this item and earn 30 points valued at $1.20. Weight: 1.00 Pound(s) |
|
