| |
INSTEON Home Control ControLinc (2430)
Safe and...
Afriel Reward Points Equal Cash Off Discounts! The Reward Points for this product is listed below.
"ControLinc V2
The ControLinc is an easy-to-use and quick-to-set-up plug-in tabletop controller. You can control up to five individual INSTEON-compatible devices or sets of devices with the tabletop ControLinc, which has a total of 14 buttons. Five sets of buttons turn your devices on and off. The ""All On"" and ""All Off"" buttons can control all devices linked to any of the five on/off buttons. ""Bright"" and ""Dim"" will adjust the brightness level of the any linked INSTEON-compatible wall dimmers or plug-in lamp dimmers. You can even put a ControLinc on your bedside table to control downstairs lamps if you hear a noise in the middle of the night."
|
If this is your first INSTEON installation, please see the recommendations below:
For INSTEON Lamp Scene Lighting you need two INSTEON LampLinc Dimmer (3-Pin) plug-in modules, two INSTEON Access Points (& Wireless Phase Couplers), and one INSTEON ControLinc Tabletop Controller.
For INSTEON Wire-in Dimmer Scene Lighting you need two INSTEON SwitchLinc Dimmers, two INSTEON Access Points, and one INSTEON ControLinc Tabletop Controller.
For INSTEON Keypad Dimmer Scene Lighting you need oneINSTEON KeypadLinc Dimmer, two INSTEON Access Points, and two INSTEON SwitchLinc Dimmers.
Setup: The ControLinc uses a simple "Plug-N-Tap" process to link to other INSTEON devices. Put the ControLinc in setup mode by pressing any of the five ON buttons for 10 seconds, and then press the button on the module you would like to control. That's all it takes to link the ControLinc to any INSTEON module!
Scene Capable: Each of the five ON/OFF buttons on the ControLinc can be set up to control one INSTEON module or multiple modules in a scene.
Works with Legacy X10 Products: Each of the five ON/OFF buttons on the ControLinc can be assigned an X10 address. This enables the ControLinc to bridge your INSTEON network with your legacy X10 network. The ControLinc ON/OFF buttons can be assigned any X10 address and do not have to be assigned sequentially. This makes the ControLinc an excellent replacement for your existing X10 mini-controller.
Certifications and Warranty: All INSTEON ControLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality-control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ControLinc line of products with a full 2-year warranty.
|
| Specifications |
|
|
| General |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2430, INSTEON ControLinc Tabletop Controller |
| UPC: |
891114000181 |
| Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
| Color: |
Black |
| Warranty: |
2 years, limited |
| Operation |
| ON/OFF Button Pairs: |
5 Scenes |
| ALL ON/ALL OFF Buttons: |
Control all INSTEON and X10 devices linked to Channels 1-5 |
| BRIGHT/DIM Buttons: |
Control INSTEON and X10 devices linked to last pressed Channel |
| Audio Alert: |
Beeper, can be disabled |
| Status LED: |
White, can be disabled |
| Operation Modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
| Combo Mode Message Order: |
INSTEON, X10, INSTEON cleanup |
| Setup Memory: |
Non-volatile EEPROM |
| INSTEON Features |
| INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
| INSTEON Links: |
417 out of 16,777,216 possible |
| INSTEON Powerline Frequency: |
131.65 KHz |
| INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| INSTEON Minimum Receive Level: |
10 mV |
| INSTEON Messages Repeated: |
Yes |
| Mechanical |
| Mounting: |
Included desk stand (flat or vertical) |
| Button Type: |
14 Carbon puck onto etched PCB switches |
| Button Appearance: |
Roundish and rubbery |
| Button Labels: |
Printable using template |
| Operating Conditions: |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions: |
5.0" H x 6.4" W x 3.0" D |
| Weight: |
1 lb 5 oz |
| Electrical |
| Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection: |
MOV rated for 150 Volts |
| Power Cord: |
6 ft, 2-pin polarized plug |
| Certification: |
Safety tested for use in USA and Canada (ETL #3017581) |
| X10 Features |
| X10 Addresses: |
Up to 5 of 256 possible |
| X10 Status Response: |
Supported |
| X10 Powerline Frequency: |
120 KHz |
| X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level: |
10 mVpp nominal |
| X10 Messages Repeated: |
No | |
Buy this item and earn 35 points valued at $1.40. Weight: 2.00 Pound(s) |
|
