X10 Home Control EagleEye Wireless Motion Sensor (MS14A)
Brand New!
Afriel Reward Points equal cash off discounts! Reward Points for this product is listed below.
Small, sleek and very powerful, the EagleEye Wireless Motion Sensor (MS14A) supercharges any home by removing the need for switches and buttons. Integrate into any X10 system to automate your home!
Outfit the basement, attic & back porch! Works great inside or outside, day or night!
Automatically turn on an area of lights, all controlled by X10 modules.
Fully weather-resistant the EagleEye Motion Sensor (MS14A) is the perfect solution for monitoring indoors and out! Easily disable the dawn/dusk feature so it will work 24 hours/day! Adjustable time delay! Set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room or turn off the lights!
How it works ....
The EagleEye Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring.
These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.
If you set the EagleEye Motion Sensor to a unique code (House Code A and Unit Code 1), then walk into the room where the EagleEye Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select. The signals transmitted onto your house wiring can also be received by the two-way Computer Interface (CM11A) to initiate macros. The Computer Interface then performs a sequence of events that you've set it up to do.
Buy this item and earn 10 points valued at $0.40. Weight: 1.00 Pound(s) |
